Sunday, November 27, 2011

LED Working light 27W - 15W


LED Work Lamp 27Watt – 15Watt

LED Work Lamp 27 watt

12 - 30 VDC 27 watt 9 Leds bulb

die cast housing lamp - Shock resistance

use for : Truck - Dump truck - Mining Truck - Forklift - LV Flood type or Euro Type Beam








LED Work Lamp 15 watt

12-30VDC 15 watt 5 leds bulb

Flood or pencil

die cast housing lamp

shock resistance



LED Working Light

LED Working Light
LED Work lamps 72 watt
Operating voltage: DC9~ 33V
Flood or Spot Beam type
operating temperature for lamp: - 40° C - + 65° C
Aluminum alloy die-cast housing with powder coated finished
IP67 CE Certificated
with OSRAM Bulb leds













LED Work Lamp 40 watt12 - 30 VDC 40 watt 16 Leds bulb
die cast housing lamp
- Shock resistance
use for : Truck - Dump truck - Mining Truck - Forklift - LV
Flood type or Euro Type Beam





Monday, July 6, 2009

Link Belt Crane


Link-BeltRTC-8030 Series II
30-ton (27.2 mt)Rough Terrain Crane
29’ – 91’ 4” (8.8 – 27.8 m) 4-section boom
Optional 25’ (7.6 m) fixed fly
Optional 27’ – 44’ (8.2 – 13.4 m) two-piece offsettable fly
143’ (43.59 m) maximum tip height
Height: 11’ 1.31” (3.39 m); Width: 8’ 6” (2.59 m); Length: 38’ 1.38” (11.62 m)
24.8 mph (39.9 km/hr) travel speed
11’ 5” (3.48 m) wheel base
20.5R25 tires
Caterpillar C6.6 6.6L, 164 hp (122.2 kW) diesel engine
Spicer 6 speed power shift
19’ 6” (5.94 m) outrigger spread, 19’ 7” (5.97 m) outrigger base
11,948 lbs (5 420 kg) maximum winch line pull
452 fpm (138 m/min) maximum winch line speed

Link-BeltHTC-8640 SL
40-ton (36.2 mt)Hydraulic Truck Crane
35.5’ – 110’(10.8 – 33.5 m)4-section boom
Optional 28.5’ – 51’ (8.7 - 15.5 m)two-piece offsettable fly
167’ (50.9 m) maximum tip height
Height: 11’ 6.69” (3.52 m)Width: 8’ 6” (2.59 m)Length: 43’ 6.38” (13.27 m)
60.1 mph (96.8 km/hr)travel speed
19' 3" (5.86 m) wheel base
Front tires - 425/65R22.5;rear tires – 11R22.5
Caterpillar C-13 12.5 L 365 hp (272.2 kW)diesel engine
ZF AS Tronic 12-speedautomated transmission
20’ 6.25” (6.25 m) outrigger spread,19’ 10.32” (6.05 m) outrigger base
15,871 lbs (7 199 kg) maximum winch line pull
502 fpm (153.2 m/min) maximum winch line speed

KEY FEATURES:
Excellent transportability — can be configured to meet some of the toughest transportation laws
Both fly options feature THREE offset positions of 2°, 20° and 40°
"Stow 'n go" outrigger pontoons are easily secured for transport
Next generation operator's cab with improved visibility and ergonomics
Pull-out CabWalk for easy access to and from the operator's cab
Integral air conditioning — optional
Large swing out engine hood doors for ease of service
Full length aluminum fenders
Job site travel with counterweight

Link-BeltHTT-8675 II
75-ton (70.0 mt)Truck Terrain Crane
BASIC SPECIFICATIONS:
41-127 ft (12.5-38.7m)four section boom
Optional 38 ft - 64 ft(11.6 – 19.5m)two piece offsettable fly
Optional two 16 ft (4.9m) extension plus 64 ft (19.5m)two-piece offsettable fly[Total attachment length is 96 ft (29.3m)]
230 ft (70.2m) maximum tip height
Height: 11 ft 9in (3.6m)Width: 8 ft 6 in (2.6m)Length: 48 ft 7 in (14.8m)
56.0 mph (90.2km/hr) travel speed
23 ft 10 in (7.26m) wheel base
445/65R22.5 front and rear tires
Caterpillar C13 12.5L 445 hp (331.8kW) diesel engine
ZF AS-Tronic automated 12-speed transmission
24 ft - 0 in (7.32m) outrigger spread, 20 ft – 6 in (6.25m) outrigger base
16,800 lbs (7 656.6kg) maximum winch line pull
460 fpm (140.2m/min) maximum winch line speed
KEY FEATURES:
Excellent transportability — can be configured to meet some of the toughest transportation laws
Boom wear pads have Teflon pucks that lubricate the boom sections (No grease)
Both fly options feature four offset positions of 2°, 15°, 30° and 45°
"Stow 'n go" outrigger pontoons are easily secured for transport
Next generation operator's cab with improved visibility and ergonomics
Pull-out CabWalk for easy access to and from the operator's cab
Integral air conditioning — optional
Large swing out engine hood doors for ease of service
Full length aluminum fenders
Turn radius of 27' 7" (8.4m) at centerline of tires
Job site travel with counterweight
Front and rear tires and wheels are interchangeable


Link-BeltATC-3200
200-ton(160.0 mt)All Terrain Crane
43.3-196.9 ft (13.2-60.0 m) six section boom
17.7 ft - 43.3 ft (5.4 - 13.2 m) two piece offsettable fly
Four 19.7 ft (6.0 m) inserts plus 43.3 ft (13.2 m) two-piece offsettable fly
[Total attachment length is 122.1 ft (37.2 m)]
331 ft (101.0 m) maximum tip height
Height: 13 ft 1in (4.0 m)Width: 9 ft 10 in (3.0 m)Length: 52 ft 4 in (16.0 m)
52.8 mph (85.0 km/hr) travel speed
27 ft 10 in (8.49 m) wheel base
20.5R25 tires
Mercedes Benz diesel engines:Upper – OM906LA 6.4L 185 hp (138 kW);Lower – OM502LA 15.9L 523 hp (390 kW)
ZF AS-Tronic automated 16-speed transmission
27 ft - 3 in (8.30 m) outrigger spread, 29 ft – 6 in (8.98 m) outrigger base
21,010 lbs (9 530.0 kg) maximum winch line pull
527 fpm (160.6 m/min) maximum winch line speed
Key Features:
Tested to meet SAE structural and stability requirements
Automatic load compensator maintains a consistent radius during load lift-off
Crane instrumentation and operational documents have North American units of measure
Multiple steering modes that can be controlled from the carrier cab
Boom dolly provisions
Free and automatic swing brake modes
Tilting interior within the operator’s cab
Air conditioning in the carrier and operator’s cabs
Outrigger controls in the operator’s cab
Central lubrication system for the upper and carrier
10x8x8 Drive/Steer
Third axle lift system
Engine compression brake and intarder
Cruise control

Link-Belt 348 HYLAB 5
300-ton (272.16 mt) Hydraulic Lattice Boom Crawler Crane
Outstanding features:
Outstanding lift capacities in the 275-300 ton class
Max-Trax - two-position track gauge system that allows for retracted or wide gauge settings for optimum lift capacity in various job conditions (patent pending)
Conventional boom offers "heavy duty" and "long range" extensions with bar pendants
Both heavy duty and long range top sections available
Luffing attachment: Heavy duty boom becomes luffing boom, and long range boom becomes luffing jib, to maximize investment
470 hp (tier 2) Isuzu diesel engine with total horsepower control - provides unbeatable line speeds under load
Remote mounted oil cooler with thermostatically-controlled, hydraulically-operated fan
Six pump main hydraulic package provides smooth, uninterrupted performance
28mm rope on front and rear hoists with automatic pawl and grooved lagging, matched drum performance - 54,000 lbs line pull - up to 648 ft per minute
Large cab with 20° tilt, air conditioning, full instrumentation and pilot-operated armchair controls with adjustable console
Full function LMI monitored by load sensing via boom hoist mounted load cell
Hydraulic pilot controls with variable hoist and swing settings
Full-length folding catwalks - right and left side
Easy transport, slab-type upper counterweights with multiple configuration lift charts
Hydraulic counterweight removal allows counterweight to be lowered all the way to the ground
Lower standard features include hook-and-pin side frames, hydraulic track tension system and completely sealed lower
Easy to install carbody counterweights - 3-piece design, front and rear - 35,000 lbs each
Full contact 50" track shoe design for maximum contact area minimizes ground bearing pressure
Dual swing drive provides great swing performance and feel - standard on all HYLAB cranes
Standard self-assembly system allows the crane to assemble itself without the need of a helper crane or special rigging block
Live mast folds rearward for transport
Attachments:
70' - 300' heavy duty attachment
85' - 355' long range attachment
295' long range + 140' jib = 435' attachment
Luffer information to come
General specs:
Track width (50" shoes): 23' 4" or 26' 7"
Track gauge: 19' 2" or 22'
Crawler length: 30' 8"
Max tail swing: 20' 6"
Upper width: 11' 11"
Main unit transport weight: 91,500 lbs
Options:
Freefall front/rear
60" track shoes
3rd drum
4th drum
Series II counterweights

Link-BeltTCC-450
45-ton (40.8 mt)Telescopic Crawler Crane
33’ – 105’ (10.06 – 32.00m)4-section boom
Height: 10’ 6” (3.2 m)
Width: 11’ (3.35 m)
Length: 40’ (12.20 m)
1.18 mph (1.90 kph)maximum travel speed
Isuzu 182 hp (135.72 kw)Tier III engine
Maximum line pull:11,023# (5 000 kg)
Maximum line speed:328 fpm (99.97 mpm)
Track gauge: 11’ (3.35 m)
Track length: 18’ (5.47 m)

Tadano Crane

All Terrain Crane
Frame Torsion resistant, welded construction made from
high strength, fine-grained steel.
Outriggers 4 point, telescopic hydraulic outriggers with
controls on both sides of carrier and in superstructure cab.
Outrigger base 6.40 m (4.38 m mid extension) x 7.58 m.
Carrier engine Mercedes-Benz 6 cylinder model OM 926 LA
(Euromot III A / EPA III), water-cooled diesel engine. Rated at
240 kW (326 HP) at 2200 min-1.
Torque 1300 Nm (132.5 kpm) at 1300 - 1600 min-1.
Engine rating according to 80 / 1269 / EWG. Fuel tank 350 l.
Transmission ZF-AS-Tronic 12 AS 2302 mechanical
transmission with electro-pneumatically actuated dry-type
clutch and automatic gear shifting with 12 forward gears and
2 reverse gears.
Drive 6 x 6
Axles
1st axle: steered, driven.
2nd axle: steered, driven, with longitudinal differential lock.
3rd axle: steered, driven.
All driven axles with transverse differential locks.
Suspension Hydro-pneumatic with levelling adjustment.
Brake system Service brakes: dual circuit compressed air
system with ABS. Parking brake: spring loaded type acting on
1st and 2nd axles. Auxiliary brakes: engine exhaust brake
and constant throttle engine brake system.
Tyres (6) 14.00 R 25 (385 / 95 R 25).
Steering system ZF Servocom dual circuit hydraulic
steering, mechanical hydraulically-assisted steering of 1st axle
and 3rd axle (up to 25 km/h), emergency steering pump.
Steering of all axles possible. All axles steered hydrostatically
from superstructure cab.
Carrier cab Two man full width cab of composite (steel sheet
metal and fibre-glass) structure, with safety glass,
air-cushioned adjustable seats, engine dependent hot-water
heater. Complete controls and instrumentation for road travel.
Speed control.
Electrical system 24 volt DC system, 2 batteries.
Electrical system conforms with EEC regulations.
Optional Equipment (at extra charge)
Towing attachment, eddy current retarder brake, engine
independent additional heater with engine pre-heat,
air conditioning, 16.00 R 25 (445 / 95 R 25), 20.5 R 25
(525 / 80 R 25) tyres, spare wheel and tyre, special painting
and lettering.
Further optional equipment available upon request.

Rough Terrain Crane
MODEL GR-700EX
CAPACITY 70,000 kg at 3.0 m BooM

5-section full power partially synchronized telescoping boom of
round hexagonal box construction with 7 sheaves at boom
head. The synchronization system consists of 2 telescope cylinders,
extension cables and retraction cables.
Hydraulic cylinders fitted with holding valves.
Fully retracted length ......................11.5 m
Fully extended length .....................44.0 m
Extension speed .............................32.5 m in 145 s
JIB
2-staged swingaround boom extension. Triple offset
(3.5o/25o/45o) type. Stores alongside base boom section.
Single sheave at jib head.
Assistant cylinders for mounting and stowing.
Length.............................................9.9 m and 17.7 m
SINGLE TOP (AUXILIARY BOOM SHEAVE)
Single sheave. Mounted to main boom head for single line
work.
ELEVATION
By a double-acting hydraulic cylinder, fitted with holding valve.
Elevation speed................-2o to 80o in 77 s
HOIST-Main winch
Variable speed type with grooved drum driven by hydraulic
axial piston motor through winch speed reducer. Power load
lowering and hoisting.
Equipped with automatic brake (Neutral brake) and counterbalance
valve. Controlled independently of auxiliary winch.
Single line pull ..................54.9 kN {5,600 kgf}
Single line speed..............143 m/min (at the 4th layer)
Wire rope..........................Spin-resistant type
Diameter x length .............19 mm x 247 m

Truck Crane
CRANE SPECIFICATIONS
MODEL
GT-550EX
CAPACITY
55,000 kg at 3.0 m
CRANE CAPACITY 55,000 kg at 3.0 m
5-section, 11.1 m - 42.0m
approx. 13,480 mm
approx. 2,820 mm
approx. 3,680 mm
approx. 39,800 kg
approx. 15,900 kg
approx. 23,900 kg
computed 83 km/h
computed 53 %
BOOM
DIMENSION
Overall length
Overall width
Overall height
MASS
Gross vehicle mass
-front axle
-rear axle
PERFORMANCE
Max. travelling speed
Gradeability (tan )
GENERAL DATA
HYDRAULIC TRUCK CRANE
SPEC. SHEET NO. GT-550E-1-00102/EX-93
GT-550EX
BOOM
5-section full power partially synchronized telescoping boom
of round hexagonal box construction with 6 sheaves at boom
head. The synchronization system consists of 2 telescope
cylinders, extension cables and retraction cables. Hydraulic
cylinders fitted with holding valves.
Fully retracted length....... 11.1 m
Fully extended length..... 42.0 m
Extension speed.............. 30.9 m in 123 s
JIB
2-staged boom extension. Triple offset (5˚ /25˚ / 45˚ ) type.
Stored under base boom section.
Single sheave at jib head.
Length............................ 9.0 m and 14.6 m
SINGLE TOP (AUXILIARY BOOM SHEAVE)
Single sheave. Mounted to main boom head for single line
work.
ELEVATION
By a double-acting hydraulic cylinder, fitted with holding valve.
Elevation speed............... - 2˚ to 80˚ in 68 s
HOIST-Main winch
Variable speed type with grooved drum driven by hydraulic
axial piston motor through winch speed reducer. Power load
lowering and hoisting. Equipped with automatic brake
(Neutral brake) and counterbalance valve.
Controlled independently of auxiliary winch.
Single line pull................. 42.2 kN { 4,300kgf }
Single line speed............. 143 m/min (at the 4th layer)
Wire rope......................... Spin-resistant type
(Non-spin type for 35 ton
capacity hook block)
Diameter x length............19 mm x 227 m

Hiab crane

Loglift and Jonsered forestry and recycling cranes
Forestry cranes are used at the beginning of the wood processing value chain: in logging and in timber transporting. The product line covers robust cranes used in logging trucks and also durable harvester and forwarder cranes. Additionally, the product line’s cranes are used in the recycling industry and as stand-alone industrial units. With grapple sizes ranging from small to large industrial grapples, there is sure to be the right size for every crane application.
Industrial cranes
Industrial cranes mounted in a fixed position are subject to constantly repeating stress, requiring lifting capability, long service life and excellent control characteristics - all of which characterize LOGLIFT and JONSERED cranes. Since the location and application determine the most suitable model in each case, Loglift Jonsered is more than happy to provide assistance during the design phase of the project.
Recycling cranes
JONSERED cranes are the number one in their field in handling scrap metal and recycled waste, where accuracy and durability is required from a crane, in addition to power. JONSERED’s balanced hydraulics allow smooth and easy movements, which reduce the stress on the crane and increase its service life. It is well known among professionals in the field that these are the decisive characteristics in everyday work.
Lightweight cranes for easier tasks
Lifting capacity of the cranes in the Light Capacity range falls below 10 tonne metres. Cranes belonging to this range are easily fitted onto most small/medium sized vehicles. Though small, these compact cranes will perform a wide variety of demanding chores with ease.



Midsized cranes for demanding chores
The cranes in the Mid Capacity range lifts between 10 and 23 tonne metres making these cranes an excellent choice for solving the rougher and tougher tasks. The wide variety of crane setup provided by the XS concept will always give you an optimal crane configuration for your line of work


Powerful cranes for heavy-duty work
Lifting capacity of cranes in the High Capacity range exceeds 23 tonne metres. The excellent flexibility in combination with the outstanding performance of these cranes makes them extraordinarily versatile. By using our XS concept you will be provided with a crane with performance beyond comparison.


HIAB XS MEWP - Two solutions in one
The safety standard for work using mobile elevating work platforms, otherwise known as personnel baskets, keeps getting stricter. The current standard, EN 280, places high safety requirements on both crane and basket. And, given that safety has always been a major concern at Hiab, your new HIAB XS HiPro crane can now be fitted with a personnel basket - in full compliance with European standard EN 280. We call this option Mobile Elevating Work Platform, MEWP.
HIAB XS MEWP is a complete, certified solution for crane and personnel basket.
HiPro crane models currently certified for MEWP are:XS 122, 144, 166, 211, 244, 288, 322, 377, 422 and 47

Sunday, July 5, 2009

Terex Crane

Terex Crane Telescopic boom

FEATURES
T300-1/T300-1XL Series
Truck Cranes
30-40 tons (27-36 mt)
maximum lifting capacity
94 ft. (28.6 m) or 105 ft.
(32.0 m) maximum boom
length
147 ft (44.8 m) or 158 ft.
(48.1 m) maximum tip
height
Four-section full power,
mechanically synchronized
boom with single lever control
Swingaway jib offsettable 0º,
15º or 30º
Two-speed main and auxiliary
winches
Quick-reeving boom head and
hook block
Fully independent multi-position
out and down outriggers
Environmental operator’s cab
optimized load visibility and
productivity
Electro-Proportional Joystick
Controls
RCI 510 load system Rated
Capacity Indicator
Travel speed to 60 mph
(96 km/h)
Easy to read load chart books
include range diagrams
Machines shown may have optional equipment
12-month or 2000 hours warranty,
major weldments are
5-years or 10,000 hours


Rough terrain crane
Maximum Lifting Capacity:
30 t (27.27 mt)
Maximum Boom Length:
30-94 ft (9.23-28.78 m)
Elevation Degree (min to max.):
-4 to 76 degrees
Available Jib Length:
1)26 ft (7.93 m)2)26-43 ft (7.93-13.11 m)
Maximum Tip Height with Jib:
S1)124 ft (37.82 m)S2)140 ft (42.7 m)
Standard Engine Type:
Cummins 6BT 5.9
Standard Horsepower:
130 hp (97 kW)
Max Speed:
24.5 mph (39.4 km/h)
Max Gradeability:
112.34%
Overall Length
39 ft 7 in (12.06 m)
Overall Width:
8 ft (2.44 m)
Overall Height:
10 ft 11.75 in (3.35 m)
Warranty:
12-month or 2000 hours


FEATURES
u 30-35 tons (27-32 mt) maximum lifting capacity
u 94'(28.6 m) maximum boom length
u 147' (44.8 m) maximum tip height
u Four-section full power, mechanically synchronized boom with single pedal control
u Swingaway jib offsettable 0°, 15° or 30°
u Two-speed main and auxiliary winches
u Quick-reeving boom head and hook block
u Fully independent multi-position out and down outriggers
u Environmental operator's cab optimizes load visibility and productivity
u Electro-proportional joystick controls
u RCI 510 load system Rated Capacity Indicator
u Easy access for routine servicing of the engine, transmission, batteries, etc. provided
by hinged lockable access doors.
u Easy to read load chart books include range diagrams
u 12-month or 2000 hours warranty, major weldments are 5-years or 10,000 hours

Wednesday, July 1, 2009